Yes, Goof Off Heavy Duty is safe for most plastic surfaces.

Spray the RustAid on full strength and don't rinse it off until the rust stains disappear. If the RustAid starts to dry up, reapply it to keep it damp until the stains dissolve away.

It could. If you're not sure if your sidewalk/driveway/siding has a sealer on it, try the RustAid in a small, inconspicuous test area to check for compatibility.

No, it's designed only to remove rust stains.

It's not recommended. Since most red brick is colored with iron oxide, and RustAid is designed to dissolve iron oxide, the product is most likely going to turn the brick white.

Most Home Depot, Lowes, Ace Hardware, True Value and Menards stores carry Goof Off products.

Goof Off Professional can damage some automobile finishes. Use Goof Off Heavy Duty instead.

While Goof Off Professional isn’t recommended for use on fingernails, it can be used to remove spilled or dripped nail polish from surfaces stated on the label.

Use Goof Off Heavy Duty instead, as it’s water based and non-flammable. 

Use Goof Off Heavy Duty instead.  It is safe on most plastics and finished surfaces. 

No. Goof Off Professional can damage the dyes in leather materials.

Goof Off Professional is safe on some vinyl materials.  Always try Goof Off Professional in an inconspicuous test area first, as it can damage many synthetic surfaces.  You may also want to consider using Goof Off Heavy Duty as it can be used on a variety of vinyl surfaces.

Goof Off Professional evaporates quickly and does not leave a residue.  If there appears to be a residue, the surface hasn’t been cleaned well enough.  Reapply the Goof Off with a rag and rub the surface until clean.

Use Goof Off Heavy Duty on clothing, carpet and fabrics. 

One of Goof Off Professional’s ingredients is acetone, which is also used in nail polish removers.

Try in a small, inconspicuous test area first.  If no damage occurs, use the product in small areas at a time, and open plenty of windows to provide proper ventilation.  Do not spread the product over large areas of floor, as it’s extremely flammable.

Good-Bye Cracks isn't a crack filler. It's designed to provide adhesion and elasticity to a properly patched crack to help prevent the crack from reappearing. Apply the product according to the direction on the can for proper results. Use a crack filler and dry before using Good-Bye Cracks.

Give it time to dry. At least thirty minutes should suffice. Give it an hour or more if it's not completely dry to the touch.

Goof Off Heavy Duty is safe for most fabrics.  All fabrics are different, so always test the product in an inconspicuous spot first to check for colorfastness.

Goof Off Heavy Duty is safe on most plastics.  There are thousands of different types of plastics out there, so always try the product in a small, inconspicuous test area first.      

Yes, but always test a small, inconspicuous area first to check for compatibility.  Goof Off Heavy Duty could damage some aftermarket tint jobs.

Porous surfaces like brick or concrete soak up spray-paint very well, so it may require more than one application of the Graffiti Remover.

Graffiti Remover will not damage real glass.  If the window is made of any type of plastic, try the Goof Off Heavy Duty instead in a small test area to see if it will do the trick.